Many individuals do not even know that there are numerous sorts of joint compound and that may make it tough to know which to use while you have no idea a lot about it. Thankfully for you, I’m going to indicate you right here methods to distinguish them. Earlier than the drywall compound dries, add texture to it with a short-handled stomping brush. Earlier than making use of the patch, you chop the outlet within the wall to a rectangular form that fits the patch, utilizing a utility knife, saber saw, or jab saw.
This patch might require two coats of compound, with dry time in between coats. You’ll also want a paintbrush, roller and tray to repaint the realm to match the prevailing drywall. First, minimize a bit of drywall that’s slightly bigger than the hole you are attempting to restore.
Dwelling interiors are sometimes covered with half-inch-thick drywall, however sure areas, resembling between a house and connected storage, require thicker, fire-rated drywall. Drywall knife to apply the first layer of drywall compound over the tape. Then just minimize the string off and use more compound to smooth out the repair, as detailed above.
You may as well make your personal backerboard from a bit of scrap plywood or drywall. Not like plaster, drywall has a seamless paper covering that rarely cracks or splits. Carry off the debris as you narrow to maintain it from falling into the wall cavity. Use a utility knife to cut vertically alongside the drywall, connecting the top and backside cuts from the hacksaw on the left and proper sides.
Tape over the joints and apply joint compound as described in the steps above (image four). Outside corners on walls take lots of abuse and might grow to be dented and damaged over time. Permit the textured compound to dry in accordance with the manufacturer’s instructions, then prime and paint the floor.